Rainwater storage tanks place a substantial load on the ground. A full 5,000-litre tank contains roughly five tonnes of water, excluding the weight of the tank and fittings. A poorly prepared base may settle, distort the tank or damage pipe connections.
Start with the manufacturer’s requirements
Obtain the installation instructions for the exact tank model before choosing a base. Some manufacturers require reinforced concrete, while others allow an appropriately compacted platform. Tank shape, capacity and material affect the support requirements. Generic slab dimensions are not a substitute for the supplier’s specifications or professional design.
Inspect the proposed location
- Check for soft fill, erosion, slopes and standing water.
- Identify underground services and nearby foundations.
- Allow space to inspect and clean the tank.
- Plan overflow drainage so discharged water does not undermine the base or flood neighbours.
- Consider how the tank will be delivered and replaced in future.
Uncertain ground may require professional assessment. Read what a geotechnical investigation involves before assuming the soil will support a heavy tank.
Prepare and inspect the base
Remove unsuitable vegetation and loose material. Prepare the subgrade and support layer according to the approved installation detail. Where concrete is specified, confirm dimensions, reinforcement, surface finish and curing requirements. The finished surface should provide continuous, level support, not a handful of isolated blocks.
Our concrete slab quantity guide explains volume calculations. It does not determine a safe slab thickness or reinforcement schedule.
Plumbing and overflow
Support pipework independently where necessary so that fittings are not strained. Include a suitable screened inlet, accessible outlet and planned overflow route. If rainwater connects near a drinking-water supply, take precautions against cross-connections and backflow. See backflow prevention basics and consult a qualified plumber.
Before filling the tank
Check the support surface, drainage, pipe connections and manufacturer’s commissioning instructions. Observe the base as the tank fills and investigate unusual movement immediately. A correctly designed and prepared platform can prevent expensive repairs later.