loaderimg
What
image
  • imageBuilding
  • imageContractors
  • imageExterior
  • imageInterior
  • imageOutdoors
  • imageSuppliers
Where
image
image

Category: Building & Construction

image
15 November

A cavity wall consists of two separate masonry leaves with a designed space between them. The cavity helps manage rainwater penetration and can accommodate thermal insulation. Wall ties connect the leaves as required by the structural design. The complete wall must be detailed for stability, moisture control, thermal performance and the intended exposure. How a […]

Read More
image
15 November

Building sites are compacted to increase the density of suitable soil or fill by reducing air voids, improving support and limiting later settlement. Compaction is especially important beneath ground-supported floors, pavements and engineered fill. It does not automatically make unsuitable soil safe for foundations. How compaction improves ground support Mechanical effort rearranges soil particles into […]

Read More
image
15 November

A load-bearing wall supports structural loads from elements such as roofs, floors or walls above and transfers them to foundations or other supports. It is part of the building’s load path. Removing or altering it without suitable replacement support can cause serious structural damage or collapse. Load-bearing versus partition walls A non-load-bearing partition primarily divides […]

Read More
image
15 November

Concrete cover is the distance from the outer concrete surface to the nearest embedded reinforcement surface. It helps protect steel from corrosion and fire and supports the bond and anchorage required by the structural design. The required cover depends on exposure, member type, reinforcement and applicable design requirements. How cover protects reinforcing steel Fresh and […]

Read More
image
15 November

A lintel is a structural member that spans an opening, such as a door or window, and transfers loads to supports on either side. It allows masonry or other construction above the opening to remain supported. The correct lintel depends on the span, loads, support conditions and construction system. How a lintel carries loads The […]

Read More
image
15 November

Brick walls need movement joints to accommodate changes in dimensions caused by temperature, moisture and other movements without creating excessive restraint stresses. A properly designed joint allows adjacent masonry sections to move relative to one another. It can reduce the risk of uncontrolled cracking, but cannot compensate for inadequate foundations or structural design. Why masonry […]

Read More
image
15 November

A damp-proof course (DPC) is a barrier installed in a wall to limit moisture movement through masonry, particularly rising damp from the ground. It forms part of a wider moisture-management system that includes drainage, floor membranes, flashings and appropriate wall detailing. How rising damp occurs Porous masonry and mortar can draw water through small connected […]

Read More
image
15 November

A raft foundation is a designed foundation slab that supports multiple walls or columns and distributes building loads over a substantial area of ground. It may incorporate beams, ribs or thickened zones. A raft can help manage differential settlement in suitable circumstances, but it is not a universal solution for weak or moving soil. How […]

Read More
image
15 November

A strip foundation is a continuous footing that spreads the load from a wall along its length into the supporting ground. It is commonly used beneath load-bearing masonry where the soil and building design permit. Its width, thickness, depth and reinforcement must be determined for the actual project. How a strip footing works A wall […]

Read More
image
15 November

House foundation depth is determined by ground conditions, building loads, settlement risk and the approved foundation design. There is no single safe excavation depth for every South African house. The footing must transfer loads to suitable ground while limiting movement that could damage the structure. How soil affects foundation depth Topsoil, organic material and uncontrolled […]

Read More