A single-leaf wall using bricks measuring 222 × 106 × 73 mm and nominal 10 mm mortar joints requires approximately 52 bricks per square metre of wall face before wastage. This is a calculation for that particular brick module, not a universal quantity for all bricks. Larger units, different bonds and joint dimensions change the result.
Calculate the brick module
For ordinary stretcher bond, add the vertical joint thickness to the brick length and the horizontal bed joint thickness to its height. Convert both dimensions to metres. In this example the module is 0.232 m × 0.083 m, giving an area of 0.019256 m². Divide one square metre by this area to obtain approximately 51.93 bricks. Round the final purchasing quantity up rather than rounding every intermediate calculation.
Worked example: a wall with openings
Consider a wall 8 m long and 2.5 m high, with a door opening of 2 m² and a window opening of 1.5 m². The gross wall area is 20 m² and the net area is 16.5 m². Multiplying by 51.93 gives approximately 857 bricks. With an illustrative 5% purchasing allowance, round up to 900 bricks. Check actual opening dimensions, bond, cuts and supplier pack sizes before placing the order.
Single-leaf and double-leaf walls
A cavity wall has two separate leaves. Calculate each leaf using its own dimensions and brick module, then add the quantities. A solid bonded wall may contain headers and other arrangements that require a different calculation. Do not assume that doubling a single-leaf estimate accurately represents every thicker wall. Structural wall thickness and restraint must follow the approved design.
What else should the budget include?
Brick quantities do not include mortar, ties, lintels, damp-proof courses, reinforcement or labour. Check whether the specified bricks are intended for exposed facework or plastered masonry. Allow for cutting and breakage based on the actual layout and delivery conditions. Use the brick calculator and building materials cost calculator for preliminary estimates. The Clay Brick Association of Southern Africa provides masonry technical guidance; confirm product dimensions with your supplier.
Frequently asked questions
Approximately 520 for the example module, before wastage. Use the actual brick dimensions and bond.
Deduct openings from the measured wall area, then allow for cuts and special detailing.
No. Joint thickness affects brick count, but mortar quantity must be estimated separately.
Related construction questions
Have More Construction Questions?
Explore our South African construction knowledge hub for practical answers about building materials, costs, regulations, construction methods and more.
Browse All Construction Questions