A roof valley is the internal junction where two sloping roof surfaces meet and channel rainwater towards a lower drainage point. Because it collects runoff from more than one roof face, a valley can carry substantially more water than an ordinary section of covering. Its lining, support and discharge arrangement must suit the roof design.
How a valley works
Rain falling on adjacent slopes flows towards the internal junction. A valley lining or proprietary system directs the combined flow downwards. Depending on the roof covering, the valley may have an exposed channel or a system-specific covered detail. Tiles or sheets adjoining the valley must be cut, supported and fixed according to the approved detail. Underlay and flashings must also be coordinated so incidental water can drain safely.
Why valleys are vulnerable to leaks
Leaves and debris can restrict the channel, particularly near trees. Damaged linings, corrosion, poorly positioned fixings and inadequate detailing can allow water to enter the roof. Concentrated runoff during intense storms may overwhelm an unsuitable valley or its downstream gutter. Water can then back up beneath adjacent roofing. A leak near a valley does not automatically mean the lining itself has failed; inspect the surrounding covering and upstream junctions.
Practical example: combined roof catchment
Imagine two roof areas with horizontal projected catchments of 30 m² and 40 m² draining into one valley. Their combined catchment is 70 m². A hypothetical 10 mm rainfall depth over that area represents 700 litres of water before losses. This illustrates why concentrated drainage matters, but does not determine the valley’s required width or capacity. Hydraulic design must consider local rainfall intensity, roof geometry, outlet conditions and the applicable system requirements.
Inspection and maintenance
From a safe ground-level position, look for visible debris, displaced tiles and staining near the valley discharge. Arrange professional inspection where access requires working at height. The roofer should check the lining, support, laps, fixings and downstream drainage. Avoid blocking the channel with sealant, mortar or improvised repairs. Structural movement or sagging requires assessment before replacing the covering.
Consult the roof covering manufacturer’s valley details and applicable standards through the SABS. The Institute for Timber Construction South Africa provides industry guidance for timber roof structures. Use the construction calculators for preliminary roof-related quantities and find roofing specialists for inspection.
Frequently asked questions
No. A ridge is a high junction; a valley is an internal low junction that collects runoff.
Yes. Restricted drainage or inadequate detailing may become apparent during intense rainfall.
No. The channel must remain able to drain. Use the specified repair detail.
Related construction questions
Have More Construction Questions?
Explore our South African construction knowledge hub for practical answers about building materials, costs, regulations, construction methods and more.
Browse All Construction Questions