A damp-proof course (DPC) is a barrier installed in a wall to limit moisture movement through masonry, particularly rising damp from the ground. It forms part of a wider moisture-management system that includes drainage, floor membranes, flashings and appropriate wall detailing.
How rising damp occurs
Porous masonry and mortar can draw water through small connected pores by capillary action. Moisture may carry dissolved salts, leaving deposits as water evaporates. A correctly installed DPC interrupts the moisture path. However, damp patches near floor level are not proof of rising damp: plumbing leaks, rain penetration and condensation can produce similar symptoms.
DPC versus damp-proof membrane
A DPC is typically incorporated into wall construction, while a damp-proof membrane (DPM) is commonly used beneath a ground-supported floor or within a floor assembly. The two barriers must be coordinated so moisture cannot bypass their junction. The designer specifies suitable products, laps, connections and levels for the actual construction system.
Why installation details matter
The barrier must remain continuous at corners, junctions and changes in level. Damage, gaps or inappropriate penetrations can compromise performance. External soil, paving or render can bridge a DPC and allow moisture to bypass it. In cavity walls, mortar droppings and poorly detailed openings can also create moisture paths. Check the specified cavity trays, flashings and drainage openings.
Practical example: damp after landscaping
Imagine a house that develops damp marks after a new patio is installed. The paving may have raised the external level above the existing DPC or directed rainwater towards the wall. Before paying for chemical injection, investigate the levels, drainage, plumbing and wall construction. Correcting the moisture source may be more appropriate than treating the visible stain alone.
For new work, coordinate wall and floor details before construction and inspect barriers before they are concealed. Use the brick calculator for masonry quantity planning, and browse building contractors and services for specialist assistance. The Clay Brick Association provides masonry detailing guidance; applicable moisture protection requirements should be checked against the project specification and relevant SANS 10400 provisions through the SABS.
Frequently asked questions
No. Repair the leak and assess the affected construction. A DPC is not a substitute for plumbing repairs.
Remedial systems exist, but the cause of damp and suitability of the treatment should be assessed first.
Yes, inappropriate continuous finishes can create a bypass path. Follow the specified junction details.
Related construction questions
Have More Construction Questions?
Explore our South African construction knowledge hub for practical answers about building materials, costs, regulations, construction methods and more.
Browse All Construction Questions