A strip foundation is a continuous footing that spreads the load from a wall along its length into the supporting ground. It is commonly used beneath load-bearing masonry where the soil and building design permit. Its width, thickness, depth and reinforcement must be determined for the actual project.
How a strip footing works
A wall transfers loads downwards into the footing. The footing provides a larger contact area with the ground than the wall alone, reducing average bearing pressure. The concrete must also resist the forces developed as the load spreads across its width. Depending on the design, the footing may be plain or reinforced concrete. The wall, footing and ground operate as a connected system.
When is a strip foundation suitable?
Strip foundations may be economical for buildings with continuous wall loads on suitable, reasonably consistent ground. They are not automatically appropriate for expansive clay, uncontrolled fill, unstable slopes or highly variable soil. A geotechnical assessment and structural design may identify a raft, piles or other solution instead. The presence of a nearby house with strip footings is not proof of suitability.
Construction checks before concrete placement
Confirm trench dimensions and founding level against the approved drawings. The founding surface should be inspected for unsuitable material, soft spots and unexpected water. Where reinforcement is specified, check bar size, spacing, anchorage and cover. Arrange required inspections before concrete conceals the work. Excavations must be managed safely, particularly where collapse or adjacent structures are a concern.
Example: estimating concrete volume
Suppose approved drawings specify a straight footing 12 m long, 0.6 m wide and 0.25 m thick. Its theoretical concrete volume is 12 × 0.6 × 0.25 = 1.8 m³. Measure intersecting strips carefully to avoid counting overlapping volumes twice. Check actual trench dimensions and any specified steps or thickened areas. The dimensions in this example illustrate arithmetic only and must not be copied as a foundation design.
Use the foundation concrete calculator for preliminary quantities and the concrete calculator for other elements. The NHBRC and Concrete Society of Southern Africa provide relevant home-building and concrete guidance. Follow the approved project specification and competent professional advice.
Frequently asked questions
No universal rule applies. Reinforcement depends on the design, ground and loading.
Yes, where designed for changes in level. Step geometry and connections must follow the drawings.
No. The footing spreads loads into the ground; the foundation wall above transfers loads to it.
Related construction questions
- What determines house foundation depth?
- What is a raft foundation?
- What is the purpose of concrete cover?
Have More Construction Questions?
Explore our South African construction knowledge hub for practical answers about building materials, costs, regulations, construction methods and more.
Browse All Construction Questions